Our products & services
 
24F Stock Glulam laminated beams and laminated headers
     2400Fb - 1.8E - 300Fv

1.9E Power Rated Glulam
  • Economical Beam and Header
  • Architectural, Industrial and Framing Appearance
  • Once piece installation
  • Flexibility in design and installation
  • Cambered or non-cambered
  • 2400Fb 1.7E and 1.8E
  • 3-1/8", 3-1/2", 5-1/8", 5-1/2", 6-3/4", 8-3/4", and 10-3/4" width
  • Lighter than steel, LVL and PSL
  • Certified green products
  • Individually wrapped
Download 24F Stock Glulam Documents
  • Anthony 24F Glulam Brochure
  • 24F V3 Load Table: 8½"
  • 24F V3 Load Table: 8¾"
  • 24F V3 Load Table: 10½"
  • 24F V3 Load Table: 10¾"
  • Owner's Guide to Understanding
    Checks in Glued Laminated Timber
  • Southern Pine Headers and Beams
  • Proper Storage & Handling
  • The Anthony 24F Glulam is a superior glued laminated beam and header for use where reliable engineered wood applications are required. It is an economical alternative to LVL and PSL in many standard structural applications where the high strength and stiffness values are not really needed. Anthony's Glulam is readily available through stocking dealers. The 3-1/2" and 5-1/2" widths are available which readily match 2x4 and 2x6 wall framing. The 24F Glulam depths also match all joists, truss, LVL, PSL, and I-joist floor or roof framing. The Anthony 24F Glulam uses only locally available Southern Pine lumber. Each piece is mechanically tested for strength and stiffness.

    To enhance Anthony 24F Glulam quality further, all outer laminations have strict quality control procedures. Each beam has a specific lumber lay-up combination which optimizes 24F Glulam performance. The highest strength lumber is placed in the tension and compression zones, efficiently and optimally using lumber resources.

    The Anthony 24F Glulam can be used for window, door and garage door headers, floor edge and center girder beams, roof ridge beams, and commercial beams and purlins where engineered wood products have proven reliability.

    APA Technical Publications
    APA CAD Details
    AFP Power Sizer Software


    FEATURES

    Dimensional Stability: 24F Glulam is a laminated composite product of high-strength lumber. This randomizes any natural defect so there is greater beam strength and a higher degree of reliability. There is also less likelihood of warping, twisting, checking, cupping or shrinking.

    Moisture Control: 24F Glulam consistently averages 12% moisture, which is near equilibrium moisture content.

    Building Code Evaluations: Adopted under all major material building codes.

    Fire Performance: 24F Glulam falls into the building code category of heavy timber, and therefore has excellent fire performance.

    Quality Assurance: 24F Glulam is manufactured in accordance with ANSI/APA A190.1-1992 (Structural Glued Laminated Timber). Plant implemented Total Quality Management, statistical process control procedures and APA The Engineered Wood Association as our quality assurance program ensure consistent quality and performance in every 24F Glulam.


    Get Acrobat Reader If you are not familiar with PDF files or you don't have an Adobe Acrobat reader on your system, click here for help on downloading your free reader and reading Adobe PDF file format.

    Copyright. All rights reserved.